Build steps (demo)
All steps
6 of 21 steps complete · 29%
Section 1Body Removal & Aluminum Removal2 of 5 done · ~4 hr 30 min total
- Unbolt the doors, hood, and trunk~45 min●○○○○
- Unbolt the body shell from the chassis~30 min●○○○○
- Lift the body off and store it safely~30 min●●○○○
- Set the bare chassis on jack stands~15 min●○○○○
- Mark and remove each aluminum panel~2 hr 30 min●●○○○
Section 2Front Suspension2 of 11 done · ~5 hr 20 min total
- Unpack and grease the front lower control arms~30 min●○○○○
- Attach the upper control arms to the chassis~30 min●●○○○
- Set pivot endplay on the upper control arms~15 min●●●○○
- Assemble the front coil-over shocks~45 min●●●○○
- Install the front coil-over shocks~30 min●●○○○
- Mount the spindles to the lower ball joints~30 min●●●○○
- Install the front hubs and dust caps~25 min●●●○○
Section 3Front Brakes2 of 5 done · ~1 hr 10 min total
- Install the caliper slider pins and grease boots~20 min●●○○○
- Identify and install the brake pads~10 min●●○○○
- Mount the front rotors to the hubs~15 min●○○○○